How to prepare PVC windows for winter and power outages

When the heating is unreliable and the power is cut on a schedule, every window needs to retain as much heat as possible. A few simple steps in autumn can help keep your flat 1–3 degrees warmer — at no extra cost.

1. Switch the hardware to winter mode

On the edge of a sash with Roto hardware there are eccentric cams (locking cams) — small oval rollers. If you turn them so that the mark points towards the seal, the sash presses more tightly against the frame. You will need a hex key or pliers.

  • Turn all the cams on the sash the same way.
  • In winter mode the handle closes slightly more stiffly — this is normal.
  • Switch back to summer mode in spring: this extends the life of the seal.

If you are not sure you can manage, our technician will adjust the hardware in a single visit.

2. Check and treat the seals

Over time the rubber seal dries out and stops retaining heat. Wipe it with a damp cloth and treat it with silicone lubricant. If the seal is cracked or has lost its elasticity, it is worth replacing — it's quick and inexpensive.

3. Lubricate the hardware

Put a drop of acid- and resin-free machine oil on the moving parts and open and close the window a few times. Lubricated hardware closes more tightly and doesn't wear out.

4. Inspect the reveals and external sills

Cracks in the reveals and gaps under the external sill are the main routes for cold air. Check them on a windy day with your palm or a candle flame. Gaps can be temporarily filled with sealant, but it is better to fix the cause: usually it is deteriorated expanding foam without protective tapes. We explain why this happens in our article on warm installation.

5. Use micro-ventilation

In winter, ventilate briefly and intensively, or use the micro-ventilation setting. This prevents condensation and mould in your flat and stops the walls and furniture from cooling down.

6. Curtains and the window sill

Heavy curtains act as an extra layer of insulation at night. Don't cover the radiator with them — warm air must rise along the glass, otherwise it will fog up.

When it's time to replace a window

If the window still lets in draughts after adjustment, the glazing unit fogs up between the panes or the sash has sagged, repairs will no longer help. A modern window with an energy-saving glazing unit and warm installation significantly reduces heat loss. You can estimate the cost of replacement in the window calculator.

← All news and articles